Odin Cp Slot
Odin, all-father, rules the realm of Asgard as the supreme deity of the Norse pantheon. Odin, a piece of Windows software released internally by Samsung, is used to flash firmware images to Android-based phones and tablets. Wait until you get a blue sign in Odin. Add the files to BL - AP - CP - CSC; Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC. Odin should output a message called “Added!!”. Now download and extract the firmware zip file to get TAR image files. Add the firmware files to Odin. If there is only one file, then add it into the AP slot. Otherwise, add to the Odin sections appropriately. Like BL for BL, AP for AP, CP for CP, CSC for CSC (not HOMECSC). Odin is a PC software used internally at all Samsung service centers for updating/flashing Firmware to Samsung devices. This software was never meant to go public but thanks to the growing world of Samsung’s Galaxy devices, Odin is now used by general users for all sorts of things like flashing stock Samsung ROMs, custom kernels and custom recoveries like TWRP.
Download Odin3 v3.10.6 flasher tool for Galaxy S6 and Galaxy S6 Edge devices. This is the suitable Odin3 version for flashing a stock firmware on all Galaxy S6 and Galaxy S6 Edge version without getting fails.The “CP” button is to flash Individual Section called modem in can be found in firmware. We can flash modem part of the firmware in this option.This button was previously labeled as “Phone”. In old firmware we will see this as Modem, Phone and in new firmware is CP. Example can be seen below in how to use odin3 part of this post.
Download Odin version for Galaxy S6, S6 edge, and S6 edge+
| Odin3_v3.12.3 | (download) |
| Odin3_v3.11.1 | (download) |
| Odin3_v3.10.7 | (download) |
| Odin3_v3.10.6 | (download) |
USB Driver for Galaxy S6, S6 edge, and S6 edge+
You also need the USB driver since using Odin flasher involves a connection between the PC and the phone. You should install it beforehand so that your PC can recognize the phone.
| v1.5.51 | Download |
| v1.5.49 | Download |
| v1.5.45 | Download |
| v1.5.33 | Download |
Proper Use of Odin3_v3.10.6
The Odin3 v3.10.6 can be use to restore back the Galaxy S6 and Galaxy S6 Edge to its original and official firmware. It can directly install a stock firmware either it comes in single and multiple tarball packages It can also be use to install an individual stock firmware packages such AP, CSC, Bootloader, Modem, Stock Recovery, Stock Kernel and even a modified system images.Flashing single stock firmware package on Odin3_v3.10.6
If the stock firmware only comes in single binary file (.tar.md5) it can be loaded in Odin3’s AP slot. This also applies on other system images such stock recovery and the stock kernel.
Flashing Multiple stock firmware packages in Odin3_v3.10.6
Some stock firmware which comes in individual binary packages such as it Bootloader, AP, CSC, Modem and sometimes including a PIT file. You may only load each specific packages in Odin3's reserved buttons.
BL = Bootloader or a Boot image
AP = AP file or a Phone image
Odin Clothing Company
CP = CP file or a Modem imageCSC = CSC file or the consumer code
Reboot the Galaxy S6 and Galaxy S6 Edge in Download mode:
To be able to use Odin3_v3.10.6 properly you must set your Galaxy S6 or Galaxy S6 Edge in 'Download Mode' screen. To activate the device in download mode follow this steps:
1) Turn off the phone.
2) Press and Hold the Volume Down, Home and Power button at the same time.
3) Press Volume Up to enter the device in Download Mode.
Enable USB debugging mode in Galaxy S6 and Galaxy S6 Edge
You may also need to enable the USB debugging mode in your Galaxy S6 and Galaxy S6 Edge. This is a basic function of an Android device that facilitate its connection to a computer. You can simply navigate this option in the device Settings>>Developer option>>USB debugging, then simply tick the box to enable it.
Install the Galaxy S6 and Galaxy S6 Edge USB Driver
To ensure that Odin3_v3.10.6 will work well accordingly, you must also install the proper USB driver for Galaxy S6 and Galaxy S6 Edge. Without the proper USB driver, your computer will not be able to recognize your Galaxy S6 and Galaxy S6 Edge.
Odin3 Failed Error While Flashing
If Odin fails while flashing the stock firmware, this is mostly caused by a bad USB data cable. As long as you have properly installed the USB driver, you must check your USB data cable if it still in good condition. You may also try another PC and laptop, if somehow the Odin3_v3.10.6 still fails.
Samsung FRP lock can’t be unlocked in any of the Professional Software boxes directly. Some models can be directly unlocked which accounts 5-10 percent of all samsung android phones.
1- What is combination files?
Samsung Combination files are raw program which is used for testing purpose for Services & to get more info of the device.
2- Why Combination files are required to unlock FRP?
To unlock FRP in Samsung phones, USB debugging has to be enable. Earlier, with Android OS 6.0 & 7.0 Talkback method was used to enable USB debugging. But with higher android version talkback method fails to enable USB Debugging.
By Flashing combination files, USB debugging get enabled and the display shows the Factory mode.
Note: If in developer mode there is OEM, it also has to be enabled.
3- How to Flash Combination Files?
Samsung combination files can be flashed using Odin tool. The file has to be selected in AP/PDA section of odin tool and phone has to connected in Download mode using Power + Volume Down + Menu and in some phones by holding both volume keys and connecting USB cable like in SM-J600g.
Steps to Unlock FRP using Combination Files:
1- Download Odin tool & Install Samsung kies.
2- Download Samsung combination files, if you model no is not in the list. Let us know in the comment.
2- Run odin tool.
3- Select Combination Files in AP/PDA.
4- Switch off your Samsung Phone. Switch on the mobile by pressing (Power+Volume down+Menu). Phone will boot in Download mode.
5- Press Volume UP to enter in Download mode. Then connect it to PC using USB Cable.
6- Click on Start to flash.
7- After Flashing phone will be in factory mode. Make sure to enable USB Debugging and if there is OEM Lock then enable it also.
Odin Clothing
If there is any Professional Box like UMT, Miracle etc. Then unlock FRP using ADB mode.
Note: Phone should be connected in ON mode to unlock FRP using Umt or Miracle.
After FRP Lock has been unlocked. Now, its time to Flash the phone with stock Firmware.
Samsung Flashing using Odin:
1- Download Samsung Stock ROM. You can also use Custom search of RepairMyMobile.
2- Connect phone in Download mode.
3- Select Files in Odin tool & then flash.
Note: After FRP has been locked. Make sure to do a Factory Data Reset in Setting.